Pressure Sensors

Different kinds of Pressure Sensors

  • -3%
    BMP180 Barometric Pressure SensorBMP180 Barometric Pressure Sensor

    Digital Barometric Pressure Sensor

    0 out of 5

    This sensor module is made using BMP180, a high performance, ultra-low power digital barometric pressure sensor manufactured by Bosch Sensortec. It is a commonly used sensor in advanced mobile devices like smart phones, tablets and sports devices. It can be easily interfaced with a microcontrollor unit through I2C interface.

    380.00 369.00
  • -11%
    Force Sensing Resistor 0.5"Force Sensing Resistor 0.5"

    Force Sensing Resistor 0.5″

    0 out of 5

    This is a force sensor resistor having a round sensing area of 0.5″ diameter. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

    550.00 489.00
  • -13%
    Force Sensing Resistor Small

    Force Sensing Resistor Small

    0 out of 5

    This is a force sensor resistor having a round sensing area of 0.2″ diameter. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

    550.00 479.00
  • -14%
    Force Sensitive Resistor SquareForce Sensor Resistor Square

    Force Sensing Resistor Square

    0 out of 5

    This is a force sensor resistor having a square sensing area of 1.5×1.5″. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

    868.00 749.00