4 Channel RF Remote Relay

-6%

4 Channel RF Remote Relay

A low cost RF Wireless Remote Relay kit which can be used for home automation applications. This remote control system uses rolling codes, thus receiver relay board will work only with remotes having same codes. Another main feature of this kit is that you can operate more than one kit at a time without any false triggering. The receiver can be programmed to work with more than 1 remote. This kit is very easy to use without any deep knowledge in electronics and can be directly connected to AC.

850.00 799.00

5 in stock

Category: Tags: , ,
  • Description
  • Additional information
  • Reviews (0)

Description

A low cost RF Wireless Remote Relay kit which can be used for home automation applications. This remote control system uses rolling codes, thus receiver relay board will work only with remotes having same codes. Another main feature of this kit is that you can operate more than one kit at a time without any false triggering. The receiver can be programmed to work with more than 1 remote. This kit is very easy to use without any deep knowledge in electronics and can be directly connected to AC.

Features

  • Uses Rolling Code
  • Momentary, Latch and Toggle modes
  • Can be directly connected to AC mains
  • Remote Learning Function

Specifications

  • Input Voltage : AC 220V ~ 240V, 50/60Hz
  • Max. Current per Channel : 10A
  • Frequency : 315Mhz

Modes

  • Toggle : Press >> ON, Press again >> OFF (Jumper placed on T)
  • Latch : Press >> ON, Press again >> No Effect (Jumper placed on L)
  • Momentary : Press and Hold >> ON, Release >> OFF (No Jumper)

Remote Learning

Matching

  1. Press the Learning Micro Switch on the receiver for 1 – 2 seconds.
  2. The indicator LED starts blinking indicating that the receiver in Matching State.
  3. Press any key on the remote.
  4. The indicator LED stops blinking if the remote is matched successfully otherwise try pressing remote again.

Learning

  1. After successful matching, press the learning key again for 1 – 2 seconds.
  2. The indicator LED starts blinking indicating that the receiver in Learning State.
  3. Press any key on the remote with in 5 seconds.
  4. Then the indicator LED blinks 3 times and stops to indicate successful learning.

Clearing

  1. Press the Learning Key for 10 seconds.
  2. You can see that the LED starts blinking initially, then glows continuously.
  3. Then the LED turns off after some time, indicates that all learned codes are successfully cleared.

Package

  • 1x Remote Control
  • 1x 4 Channel RF relay board

Additional information

Weight 150 g
Dimensions 99 x 80 x 28 mm