-15%

Arduino Pro Mini ATmega328p

350.00 299.00

This is a low cost 5V arduino made with ATmega328p running the 16MHz bootloader. This board is intended for users who requires flexibility, small size and low cost. It has an on-board voltage regulator so that it can accept voltages in the range 5 to 12V. You can upload sketches to this board using FTDI USB to UART Converter or using another Arduino Board. This board does not comes with connectors, so that you can solder connectors or wires as per your requirements.

2 in stock

  • Description
  • Additional Information
  • Reviews (0)

Product Description

This is a low cost 5V arduino made with ATmega328p running the 16MHz bootloader. This board is intended for users who requires flexibility, small size and low cost. It has an on-board voltage regulator so that it can accept voltages in the range 5 to 12V. You can upload sketches to this board using FTDI USB to UART Converter or using another Arduino Board. This board does not comes with connectors, so that you can solder connectors or wires as per your requirements.

Note : If you are providing unregulated supply to the board, please make sure that it is connected to RAW pin instead of VCC.

Specifications

  • Microcontroller : ATmega328p
  • Input Voltage : 5 ~ 12V
  • Digital I/O Pins : 14 (RX, TX, D2 – D13)
  • PWM Output : 6 (D3, D5, D6, D9, D10, D11)
  • Analog Input Pins : 8 (A0 – A7)
  • Current per I/O pin : 40mA
  • Clock Frequency : 16MHz
  • Flash Memory : 32KB
  • SRAM : 1KB
  • EEPROM : 512 bytes

Package

  • Pro Mini ATmega328P board
  • Header Pins

Additional Information

Weight 4 g
Dimensions 34 x 18 mm