Flame Sensor Infrared Receiver
The flame sensor infrared receiver module can detect a flame or light source of wavelength from 760nm to 1100nm. It is particularly useful in fire alarms. The sensitivity of the sensor can be adjusted using the potentiometer provided. The output is given in digital format. The circuit uses a LM393 comparator.
4 in stock
- Additional Information
- Reviews (0)
- Can detect both a flame or an infrared light source having wavelength between 760nm to 1100nm
- The angle of detection is 60°
- Sensitivity can be adjusted using blue potentiometer
- The wide voltage LM393 comparator output is digital and has a driving ability more than 15mA
- The input voltage is between 3.3volts and 5volts
- There are fixed bolt holes provided for easy mounting
|Dimensions||32 x 14 mm|
Temperature and Humidity Sensor0 out of 5
DHT11 is one of the commonly used sensor module for Temperature and Humidity measurement. It is lab calibrated and provides digital output. DHT11 consist of a NTC temperature measurement component, a resistive type humidity measurement component and a high performance 8-bit microcontroller inside. It outputs data every 2 seconds. It is highly reliable and robust.
Digital Barometric Pressure Sensor0 out of 5
This sensor module is made using BMP180, a high performance, ultra-low power digital barometric pressure sensor manufactured by Bosch Sensortec. It is a commonly used sensor in advanced mobile devices like smart phones, tablets and sports devices. It can be easily interfaced with a microcontrollor unit through I2C interface.
ACS712 Hall Current Sensor0 out of 5
This Hall Effect Current Sensor module is made using AC712, a fully integrated hall effect based linear current sensor IC with 2.1 kVRMS isolation and a low resistance current conductor. It is able to measure AC or DC currents up to 30A. This module can be directly interfaced with 5V microcontrollers having Analog to Digital Converter module.
HC-SR501 PIR Motion Sensor0 out of 5
HC-SR501 PIR Motion Detector is popular for sensing motion using infrared technology with automatic detection. It includes a pyroelectric infrared sensor. It has a detection range below 120° and detection distance adjustable between 3 to 7 meters. It also has a wide operating voltage range of DC4.5V-20V.
HR202L Humidity sensor0 out of 5
HR202L Humidity sensor is a low cost hygrosensitive module made of moisture sensitive components of organic polymer materials. The resistance of the module changes relative to temperature and humidity.
Waterproof Digital Temperature Sensor DS18B200 out of 5
This is a waterproofed and prewired version of DS18B20. The DS18B20 is a high precision one wire digital temperature sensor providing 9-bit to 12-bit Celsius temperature measurements and has an alarm function with non-volatile user programmable upper and lower trigger points. The DS18B20 communicates over a 1 wire bus. It has an operating temperature range of -55°C to 125°C and is accurate to +-0.5°C over the range of -10°C to 85°C. . Each DS18B20 has a 64 bit serial code enabling multiple DS18B20 to be connected to the same 1 wire bus.
HC-SR04 Ultrasonic Distance Sensor0 out of 5
HC-SR04 Ultrasonic Distance Sensor is a popular and low cost solution for non-contact distance measurement function. It is able to measure distances from 2cm to 400cm with an accuracy of about 3mm. This module includes ultrasonic transmitter, ultrasonic receiver and its control circuit.
Flex Sensor 4.5″0 out of 5
This is a simple flex sensor of length 4.5 inch manufactured by Spectra Symbol. The resistance across the sensor terminals increases as the sensor is flexed. This is a patented technology by Spectra Symbol. This sensor can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).
Magnetic Reed Switch 14mm0 out of 5
This is a small non-contact magnetic switch which operates under the presence of Magnetic Field. It is commonly referred to as Reed Switch or Magnetic Switch. This switch contains a glass capsule in which two ferrous materials. When exposed to a magnetic field these ferrous materials comes in contact and switch closes due to magnetic attraction. When the magnetic field is removed these materials separates and switch opens.
CMOS VGA Camera Module – OV76700 out of 5
This is a camera image sensor module using IC OV7670, which is a low voltage CMOS image sensor. It provides full functionality of a VGA camera and an image processor. Its output can be full-frame, sub-sampled or windowed 8 bit images in a wide range of formats and can be controlled through Serial Camera Control Bus (SCCB) interface. This interface is compatible with I2C interface which makes it easy to interface with Arduino Boards, Raspberry Pi and microcontrollers.