Force Sensing Resistor 0.5″

-11%

Force Sensing Resistor 0.5″

This is a force sensor resistor having a round sensing area of 0.5″ diameter. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

550.00 489.00

20 in stock

  • Description
  • Additional information
  • Reviews (0)

Description

This is a force sensor resistor having a round sensing area of 0.5″ diameter. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

Specifications

  • Force Sensitivity Range : < 100 g ~ > 10 kg
  • Pressure Sensitivity Range : < 1.5 psi ~ >150 psi (< 0.1 kg/cm2 ~ > 10 kg/cm2)
  • Stand-Off Resistance : > 1MΩ
  • Device Rise Time : 1 – 2 msec
  • Life Time : > 10 million actuations
  • Temperature Range : -30ºC ~ +70°C
  • Connector Pitch : 2.54mm

Construction

Force Sensitive Resistor Construction

Force Sensitive Resistor Construction

Datasheet

Additional information

Weight 1 g
Dimensions 54.1 x 18.3 mm
Temperature Range

-30ºC ~ +70°C

You may also like…