Force Sensing Resistor Square

-14%

Force Sensing Resistor Square

This is a force sensor resistor having a square sensing area of 1.5×1.5″. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

868.00 749.00

17 in stock

  • Description
  • Additional information
  • Reviews (0)

Description

This is a force sensor resistor having a square sensing area of 1.5×1.5″. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).

Note : This product is costly just because it uses a patented technology by Spectra Symbol.

Specifications

  • Force Sensitivity Range : < 100 g ~ > 10 kg
  • Pressure Sensitivity Range : < 1.5 psi ~ >150 psi (< 0.1 kg/cm2 ~ > 10 kg/cm2)
  • Stand-Off Resistance : > 1MΩ
  • Device Rise Time : 1 – 2 msec
  • Life Time : > 10 million actuations
  • Temperature Range : -30ºC ~ +70°C
  • Connector Pitch : 2.54mm

Construction

Force Sensitive Resistor Construction

Force Sensitive Resistor Construction

Datasheet

Additional information

Weight 2 g
Dimensions 83.8 x 43.7 mm