Vibration Sensor Module SW-420
SW-420 Vibration Sensor is a one of the most commonly used module for vibration or tilt detection above a particular threshold. This module consisting of vibration sensor SW-420 switch and comparator LM393. The comparator converts signals from switch to Digital Output. The module outputs logic LOW when there is no vibration. Compatible with Arduino, Raspberry Pi, PIC, Atmel, 8051 Microcontrollers.
1 in stock
- Additional Information
- Reviews (0)
- The switch is closed in normal condition
- The comparator LM393 enables Digital Output
- Supply voltage: 3.3V – 5V
- Power Indicating LED
- Vibration Indicating LED
|Dimensions||32 x 14 mm|
Flex Sensor 2.2″0 out of 5
This is a simple flex sensor of length 2.2 inch manufactured by Spectra Symbol. The resistance across the sensor terminals increases as the sensor is flexed. This is a patented technology by Spectra Symbol. This sensor can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).
HC-SR501 PIR Motion Sensor0 out of 5
HC-SR501 PIR Motion Detector is popular for sensing motion using infrared technology with automatic detection. It includes a pyroelectric infrared sensor. It has a detection range below 120° and detection distance adjustable between 3 to 7 meters. It also has a wide operating voltage range of DC4.5V-20V.
Magnetic Reed Switch 14mm0 out of 5
This is a small non-contact magnetic switch which operates under the presence of Magnetic Field. It is commonly referred to as Reed Switch or Magnetic Switch. This switch contains a glass capsule in which two ferrous materials. When exposed to a magnetic field these ferrous materials comes in contact and switch closes due to magnetic attraction. When the magnetic field is removed these materials separates and switch opens.
Alcohol Gas Sensor MQ30 out of 5
MQ3 is a low cost semiconductor sensor which can detect the presence of alcohol gases at concentrations from 0.05 mg/L to 10 mg/L. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air. It’s conductivity increases as the concentration of alcohol gases increases. It has high sensitivity to alcohol and has a good resistance to disturbances due to smoke, vapor and gasoline. MQ3 alcohol sensor can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi etc using an Analog to Digital Converter (ADC)
GY-273 Triple Axis Magnetometer0 out of 5
The GY-273 Triple Axis Magnetometer module is made using HMC5883L, an IC for low magnetic field sensing. It is able to measure magnetic fields ranging from ±1.3 ~ 8 gauss and provides I2C digital interface for applications such as low cost magnetometry and compassing. This module can easily be interfaced with Arduino Boards, Raspberry Pi, 3.3V and 5V microcontrollers as it can work from 3V to 5V supply.
Flex Sensor 4.5″0 out of 5
This is a simple flex sensor of length 4.5 inch manufactured by Spectra Symbol. The resistance across the sensor terminals increases as the sensor is flexed. This is a patented technology by Spectra Symbol. This sensor can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).
Force Sensing Resistor 0.5″0 out of 5
This is a force sensor resistor having a round sensing area of 0.5″ diameter. The resistance across the sensor terminals will vary depending upon the amount of pressure applied to the sensing area. As the applied pressure increases, resistance decreases. During no load conditions, the resistance will be greater than 1MΩ. This sensor is able to measure forces in the range of 100g to 10kg. You can easily interface this sensor with Microcontrollers, Arduino Boards, Raspberry Pi etc. using an Analog to Digital Converter (ADC).
HC-SR04 Ultrasonic Distance Sensor0 out of 5
HC-SR04 Ultrasonic Distance Sensor is a popular and low cost solution for non-contact distance measurement function. It is able to measure distances from 2cm to 400cm with an accuracy of about 3mm. This module includes ultrasonic transmitter, ultrasonic receiver and its control circuit.
Flame Sensor Infrared Receiver0 out of 5
The flame sensor infrared receiver module can detect a flame or light source of wavelength from 760nm to 1100nm. It is particularly useful in fire alarms. The sensitivity of the sensor can be adjusted using the potentiometer provided. The output is given in digital format. The circuit uses a LM393 comparator.
Temperature and Humidity Sensor0 out of 5
DHT11 is one of the commonly used sensor module for Temperature and Humidity measurement. It is lab calibrated and provides digital output. DHT11 consist of a NTC temperature measurement component, a resistive type humidity measurement component and a high performance 8-bit microcontroller inside. It outputs data every 2 seconds. It is highly reliable and robust.