Transformerless SMPS using ICs

Home › Forums › General Electronics › Transformerless SMPS using ICs

Tagged: , , ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 24, 2016 at 3:38 pm #13170
    sihabudheent
    Participant

    Please suggest some ICs for transformerless switched mode power supply circuits of 12V DC.

    November 26, 2016 at 9:02 am #13196
    Ligo George
    Keymaster

    Hi,

    Kindly let me know what is the expected Input Voltage, Output Voltage, Required Current etc.

    November 26, 2016 at 1:07 pm #13200
    sihabudheent
    Participant

    Hi Ligo George,

    Here are my requirements,

    1.  Input Voltage upto 90-300V AC @50Hz
    2. I need dual output voltage – 5V and 12V
    3. Need isolated one
    4. It is used for out door application
    5. It is placed in IP65 plastc boxes
    6. It is used for out door street light application
    7. Should not use any transformers for stepdown

    Please sugget any IC for smps circuit without use of Transformer, I Knw one IC “LNK304DN”, which doesnt need transformer. Kindly suggest any other IC.

    November 26, 2016 at 2:36 pm #13209
    Ligo George
    Keymaster

    Check the IC SR086. It is a inductorless switched mode regulator designed to operate directly from rectified AC mains. But it will provide only up to 100mA current.

    If your application requires current higher than 100mA, you should use a ferrite coil.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
>