Reply To: adc not working on hardware but works on proteus

Home › Forums › Microcontrollers › PIC Microcontroller › adc not working on hardware but works on proteus › Reply To: adc not working on hardware but works on proteus

February 18, 2019 at 11:03 pm #15888
BaseMell
Participant

Hi..in my case I found that the microcontroller is powered by +5V. I had to change the Power Rail Voltage to +3.3V.
I changed the voltage from the “Design->Configure Power rails” menu entry. From the drop down list, I picked VCC/VDD and changed the voltage from 5 to 3.3. Now it works correctly.

>