- This topic has 2 replies, 3 voices, and was last updated 10 years ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
How to connect more than 2 serial devices to an ARM microcontroller?
or how to use a single serial port of a microcontroller for 2 devices?You may multiplex UART using ICs such as 74HC4052 or you can program GPIO pins as UART (Software UART).
Here is a small module made using IC 74HC4052, you can use the following link for reference.
https://www.atlas-scientific.com/_files/_datasheets/_circuit/serial_port_connector_datasheet.pdf
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.