Forum Replies Created

Viewing 1 post (of 1 total)
  • Author
    Posts
  • February 18, 2019 at 11:03 pm in reply to: adc not working on hardware but works on proteus #15888
    BaseMell
    Participant

    Hi..in my case I found that the microcontroller is powered by +5V. I had to change the Power Rail Voltage to +3.3V.
    I changed the voltage from the “Design->Configure Power rails” menu entry. From the drop down list, I picked VCC/VDD and changed the voltage from 5 to 3.3. Now it works correctly.

  • Author
    Posts
Viewing 1 post (of 1 total)
>