PIC 16F877A microcontroller and mpu 6050 3 axis Accelerometer & GyroscopePrasad2015-04-03T21:53:32+00:00 Home › Forums › Microcontrollers › PIC Microcontroller › PIC 16F877A microcontroller and mpu 6050 3 axis Accelerometer & Gyroscope This topic contains 1 reply, has 2 voices, and was last updated by Ligo George 2 years, 4 months ago. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts April 3, 2015 at 9:53 pm #11149 PrasadParticipant MPU6050 interface with PIC16F877A, Is this possible ? April 5, 2015 at 11:27 am #11151 Ligo GeorgeKeymaster MCP6050 is a 3.3V device while 16F877A is 5V. So the best method is to use a Bi-directional logic level converter to connect both devices via I2C. But I hope that it will work fine with 3.3V PULL UP resistors between them for testing / hoppy project purposes. Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.