PIC16f877a with HC 06 Bluetooth modulePrasad2015-03-05T11:55:09+00:00 Home › Forums › Microcontrollers › PIC Microcontroller › PIC16f877a with HC 06 Bluetooth module This topic contains 2 replies, has 3 voices, and was last updated by Puran Pokhreal 11 months, 2 weeks ago. Log In Register Lost Password Viewing 3 posts - 1 through 3 (of 3 total) Author Posts March 5, 2015 at 11:55 am #10993 PrasadParticipant Can I connect a HC 06 module to PIC16f877a March 5, 2015 at 3:08 pm #10995 Ligo GeorgeKeymaster Yes, ofcourse. HC06 is a 3.3V device. So power it from a 3.3v supply. Make grounds of both supply common. You should reduce the 5V TX output of PIC to 3.3V by using voltage divider resistors before connecting to RX of HC06. You can use a 10K and 4.7K for that. 3.3V TX output of HC06 can be directly connected to PIC RX. PIC will detect 3.3V as HIGH level. February 7, 2017 at 12:56 pm #13474 Puran PokhrealParticipant I read to PIC16f877a with HC 06 bluetooth module Author Posts Log In Register Lost Password Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.