About Proteus print outmanjula2015-07-05T22:43:16+00:00 Home › Forums › PCB Designing and Manufacturing › About Proteus print out Tagged: Proteus This topic contains 8 replies, has 3 voices, and was last updated by Amol 1 year, 3 months ago. Viewing 9 posts - 1 through 9 (of 9 total) Author Posts July 5, 2015 at 11:24 am #11557 manjulaParticipant I have proteus software but I can’t to print out or save this one July 5, 2015 at 10:43 pm #11562 Ligo GeorgeKeymaster Sorry, I don’t understand your question. What do you meant by print out ? July 6, 2015 at 8:55 pm #11571 manjulaParticipant I can use proteus for designing to circuit but I am not able to save or print out for pcb manufacture. Please Help Me. best regard Manjula July 7, 2015 at 10:08 am #11574 Ligo GeorgeKeymaster It seems like you are using a cracked / pirated version of proteus. It might be the problem. Please contact Labcenter Electronics support if you are using orginal version. You may try following steps too. Try running Proteus as administrator. Right Click >> Run as Administrator Try reinstalling Proteus. July 7, 2015 at 7:29 pm #11575 manjulaParticipant Thank you so much for helping me. I will try. July 7, 2015 at 8:09 pm #11576 manjulaParticipant I don’t know sir. Please send me the original proteus software link. Attachments:You must be logged in to view attached files. July 8, 2015 at 8:03 am #11578 Ligo GeorgeKeymaster It is because you are using demo version. Proteus is not a free software. You can buy Proteus from Labcenter Electronics. July 8, 2015 at 7:07 pm #11581 manjulaParticipant Thank you so much. I’ll try to shift to any other PCB designing software. Manjula December 9, 2015 at 5:43 pm #11900 AmolParticipant USE THE CRACK VERSION OF PROTEUS Author Posts Viewing 9 posts - 1 through 9 (of 9 total) You must be logged in to reply to this topic.